φ14.5mm leading wires current transformer 760:1
Structural parameters:
The main technical parameters
Model | ZMCT360I-1 |
input current | 0-100A (sampling resistor 20Ω) |
Rated output current | 26.3mA at input 20A |
turns ratio | 760:1 |
phase angle error | No requirements (input 20A, sampling resistor 20Ω) |
Accuracy class | 3.0 |
Permissible error | -3.0%≤f≤+3.0% (input 20A, sampling resistor 20Ω) |
isolation voltage | 3000V |
application | measurement |
Encapsulation | Epoxy |
installation | Output leads installation |
operating temperature | -40℃~+85℃ |
Air Ambient | -40℃~+85℃ |
Instruction
Figure Ⅰ FigureⅡ
1. ZMCT360I-1 used for the measurement, the typical usage is shown in Figure Ⅰand Figure Ⅱ. R is a sampling resistor.
Material list
NO. | Material | Spec, model | UL code | SGS |
1 | Silicon Steel core with epoxy coating | Ø18.5*26.5*5 | —— | yes |
2 | Enameled wire (Winding wire) | Ø0.13, 760T | E258243 | yes |
3 |
Tape | Flame retardant, Environmental protection, 5mm |
E328315 |
yes |
4 | Fills and seals material | TXH-9201 epoxy resin insulating compound | E196959 | yes |
5 | Outer covering | Environmental protection | E59481 | yes |
6 | Leading wires | UL1007-22# | E315651 | yes |