φ7.5mm PCB mounting current transformer 1000:1
Structural parameters
“*”means “same polarity”
Front view Bottom view
The main technical parameters
Model | ZMCT146D-1 |
input current | 0~100A（sampling resistor 10Ω） |
Rated output current | 10mA at input 10A |
turns ratio | 1000:1 |
phase angle error | ≤20＇（Sampling resistor 10Ω） |
linear range | 0~100A（sampling resistor 10Ω） |
linearity | ≤0.2%（5%dot~120%dot of 10A） |
Permissible error | -0.2% ≤ f ≤+0.2%（input 5A, sampling resistor 10Ω） |
isolation voltage | 3000V |
application | Measurement or protection |
Encapsulation | Epoxy |
Outer casing material | Flame retardant PBT |
operating temperature | -40℃~+80℃ |
Direction for use
Figure Ⅰ FigureⅡ
1.Typical usage is shown in Figure 1 and Figure 2. R is a sampling resistor.
2. Empty pin can not be grounded.