φ6.5mm PCB mounting current transformer 2000:1 40A
Structural parameters
ZMCT116C Current Transformer
Small size，high accuracy，good consistency，for current and power measurement
Structural parameters:
Remarks: Primary input: straight- through type( make the measured circuit be through the hole)
Secndary output:1、2pin empty pins: 3、4pin
Front view Bottom view
The main technical parameters
Model | ZMCT116C |
input current | 0~40A（sampling resistor 50Ω） |
Rated output current | 2.5mA at input 5A |
turns ratio | 2000:1 |
phase angle error | ≤20＇（input 1A，sampling resistor 50Ω） |
current range | 0~40A（sampling resistor 50Ω） |
linearity | 0.2%（5%dot~120%dot） |
Permissible error | -0.2%≤f≤+0.2%（input 1A，sampling resistor 50Ω） |
isolation voltage | 4500V |
application | current and power measurement |
Encapsulation | Epoxy |
installation | PCB mounting（Pin Length>3mm） |
operating temperature | -40℃~+85℃ |
Direction for use
Figure Ⅰ FigureⅡ
1. ZMCT116C used for measurement. Typical usage is shown in Figure 1 and Figure 2. R is a sampling resistor.
2. Empty pin can not be grounded.