φ6.5mm PCB mounting Current Transformer 1000:1 8A
Structural parameters
ZMCT205D-2 current transformer
Small size, high accuracy,good consistency, for simple current monitoring and control
1. Structural parameters
Ø Unit: mm
Ø Toleance: ±0.2mm
Ø Pin length： 3.0±0.5mm
The main technical parameters
Model | ZMCT205D-2 | |
Rated input current | 5A | |
Rated output current | 5mA | |
turns ratio | 1000:1 | |
phase angle error | ≤60＇（input 5A，sampling resistor 25Ω） | |
linear range | 0~8A（sampling resistor 25Ω） | |
linearity | ≤0.5%（5%dot ~120%dot） | |
Permissible error | -0.5% ≤ f ≤+0.5%（input 5A，sampling resistor 25Ω） | |
isolation voltage | 4500V | |
application | simple current monitoring and control | |
Encapsulation | Epoxy | |
installation | PCB mounting | |
operating temperature | -25℃~+85℃ |
Test datas
Direction for use
Figure Ⅰ Figure Ⅱ
ZMCT205D-2 used for the measurement, the typical usage is shown in Figure Ⅰand Figure Ⅱ. R is a sampling resistor.
Material list
NO. | Material | Spec, model | UL code | SGS | |
1 | Ultracrystallite core | Ø10*12.4*3.2 | - | yes | |
2 | Core Shell | PBT | E332375 | yes | |
Flame retardant, | |||||
3 | Tape | Environmental protection, | E165111 | yes | |
V0 105 degrees, | |||||
（Plaster）Yellow Glue | |||||
4 | Enameled wire | 2UEW、Ø0.08, 1000T | E258243 | yes | |
(Winding wire) | |||||
5 | Outer | ZCT1-1, Environmental protection | E238981 | yes | |
covering/Outside Shell | |||||
6 | Fills and seals | TXH-9201-10 epoxy resin | E196959 | yes | |
material | insulating compound | ||||
7 | PINS | STEEL | yes | ||